Topcon AT-B3A 28x Automatic Level

Description

New Topcon 28x Automatic Level
Topcon model AT-B3A 28X automatic level is a great choice for long range construction site work.  The ultra stable compensator and clear optics of the AT-B3A allow precise elevation control at longer distances than lower powered levels. Includes plumb bob, adjusting tools, rain hood, lens cloth, owner's manual, warranty card and carrying case. The unit comes new-in-box from the factory with a Five (5) year warranty.
Rapid, Stable, and Durable Compensator
The compensator of AT-B series incorporates four suspension wires made of super-high-tensile metal that features minimal thermal expansion coefficient, providing unmatched durability and accuracy even in the harshest environmental conditions. Finely tuned magnetic damping system quickly levels and stabilizes the line of sight despite the fine vibrations present when working near heavy equipment or busy roadways.
20cm (7.9 in.) - Ultra-Short Focusing Range
The AT-B series can focus on objects at 20cm (7.9 in.) in front of the telescope. This feature dramatically facilitates the works in confined spaces.
Focus
Clampless, Endless Fine Horizontal Adjustments
Fine horizontal knobs located on both sides of instrument can be operated without clamping, speeding up aiming procedures to the staff and other objects.
Easy-to-See Circular Level
Circular level can be viewed via integrated pentagonal prism (AT-B2) or plane mirror (AT-B3/B4) without changing your eye height.
Horizontal Circle for Angle Measurement
Horizontal angles can be directly read in 1u00b0 or 1gon units. Free rotation feature of the horizontal circle allows you to read any angle from zero. The circle is covered for protection against dirt and scratch. The readout window is located below the eyepiece for quick reading.
All-Weather Dependability
With the IPx6 rating, the instrument is protected against powerful water jets from all directions, meaning the AT-B series withstands a sudden shower or torrential rainfall. The advanced protection design not only prevents water penetration, but also deters clouding or condensation inside the telescope.
Distance, Angle, and Height Measurement
In addition to height and angle, distance to the staff can be simultaneously measured using stadia lines. This is accomplished by reading the length of staff between two stadia lines and multiplying the value by 100.
Rapid, Accurate, and Stable Automatic Compensation
Ultra-Short 20cm (7.9 in.) Focusing
All-Weather Dependability
Clampless, Endless Fine Horizontal Adjustments
AT-B3
Telescope
Length
215mm (8.46 in.)
Magnification
28X
Objective Aperture
36mm (1.42 in.)
Resolving Power
3.5"
Field of View
(at 100m/328ft.)
25'
(2.5m / 8.2ft.)
Minimum Focus
0.2m (7.9 in.) from end of telescope
0.3m (1ft.) from instrument center
Image
Erect
Stadia Constant
0
Stadia Ratio
100
Accuracy (1km double run leveling)
Without Micrometer
1.5mm (0.06 in.)
With Micrometer
n/a
Compensator
Type
Pendulum compensator with magnetic damping system
Setting Accuracy
0.5"
Working Range
115'
Circular level
Sensitivity
10' / 2mm
Horizontal circle
Diameter
103mm (4.1 in.)
Minimum Division
1 Deg/ 1 Gon
General
Water Resistance
IPX6 (IEC 60529:2001)
Operating Temperature
-4F to +122F
Size
Width
130mm (5.12 in.)
Length
215mm (8.46 in.)
Height
135mm (5.31 in.)
Weight
1.7kg (3.7 lbs.)